Features
The black SOLID SHINE PT-RZ470UK 1-Chip DLP Projector from Panasonic is free from lamps or air filters, so that you enjoy maintenance-free use for about20,000 hours while maintaining high brightness and picture quality. To enhance permanent installation use, the DIGITAL LINK support has been added,allowing you to transmit video, audio, and control signals up to 328 (100m) over a single LAN cable. This LED/Laser projector features a 2x zoom and awide lens shift range, thus providing flexibility for easy first time and replacement installations. It is loaded with features for professionalintegration, such as Portrait mode, a Multi Screen Support System, and 3D projection. The Full HD PT-RZ470UK Projector expands projection capabilities inmuseums, digital signage, and more.
- Bright Picture Quality for a Long Period of Time
- The projector features 3500 lumens of brightness. Rate of brightness deterioration in the LED/Laser-combined light source is extremely slowcompared to lamp based projectors. The SOLID SHINE drive uses a built-in sensor to constantly detect the light intensity of the light source andcorrect corresponding changes in white balance. This all helps to maintain picture quality for a long period of time. Contrast ratio is 20,000:1,and images are reproduced with a wide dynamic range
- The LED/Laser-Combined Light Source Enables Approximately 20,000 Hours of Continuous Operation
- This light source requires no maintenance for approximately 20,000 hours. In many cases, this means no maintenance until your next refresh cycle.Naturally, there are no lamp burnout problems during use, so reliability is further increased. There is also no filter to clean due to carefullyengineered sealed optics. As a consequence, running cost is dramatically lowered because of the savings on lamp costs, maintenance labor and hassleof stocking lamps
- 30x Drive Switching Prevents Color Breaking
- In a 1-chip DLP system projectors with conventional lamp, a color wheel is used for time-division multiplexing in a method where the human eyecombines the result to achieve a full-color palette. In the projector, this is done by on/off switching of the LED/Laser-combined light source. APanasonic power supply circuit provides time-division multiplexing
- Heat Pipe Cooling System Maintains Stable Operation up to 113F (45C)
- Laser cooling is performed by releasing the heat to cooling fins, then cooling with a heat pipe cooling system. This suppresses temperature risesinside the projector and allows stable operation up to an ambient temperature of 45C (113F). The use of this heat pipe cooled system alsoachieves quiet operation of 29 dB, enabling viewers to concentrate on the presentation or on quiet movie scenes
- Dust-Resistant Structure with an Airtight Optical Block
- The area between the LED/Laser to the DLP chip and prism is hermetically sealed to form an airtight structure for the optical block, the heart ofthe projector. This resists the effects of dust and other particles in the air, and enables use of the projector in a wide range of environments
- DICOM Simulation Mode
- This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images
- Easy Remote Monitoring and Control Over a LAN
- Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messagingfunction can also notify you the overall projector status. In addition, Multi-Projector Monitoring and Control Software Ver. 2.8 is available formonitoring and controlling multiple Panasonic projectors from a single PC. The wired LAN terminal is compatible with PJLink (class 1), an openprotocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors
- Horizontal/Vertical Lens Shift
- The wide shift range accommodates various room sizes and shapes. When lights or ventilation holes are located in the ceiling mounting site, you cansimply relocate the projector to avoid them
- Flexible 360-Degree Installation
- The projectors can be rotated vertically. This means you can install one at any up-and-down angle you want, to accommodate different installationconditions
- The Daylight View Basic Ensures Clear Images Even in Brightly Lit Rooms
- It achieves sharp, easy-to-see images by reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms.A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to thesurrounding illumination
- Rec. 709 Mode for HDTV Projection
- Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source areprojected
- First-Time and Replacement Installations
- 2x Zoom Lens: For a 120" (3 m) diagonal widescreen, the projection distance extends from approximately 12.8' (3.9 m) to approximately 25.7' (7.8 m)
- Lens-Centered Design
- A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning theinstallation site
- Compatible with Crestron RoomView
- The LAN terminal allows a computer connected to the network to use Crestron RoomView application software to manage and control system devices
- Image Appears Immediately-No Need for Cooling After Use
- Images do not appear quickly with lamp-based projectors because the projector requires time to warm up. With this projector, the image appearsalmost instantly. There's also no cooling time required when turning the power off, so you can quickly turn the projector on and off as many timesas needed
- 24/7 Operation
- Ordinary lamps are not well suited to continuous operation. Because the projector does not use a lamp, has efficient cooling system and uses DLPchip that has a long life, they are capable of 24/7 operation
- Scheduling Function
- Scheduled operation is possible using the built-in timer function, without having to use a PC and software
- Effective Theft Prevention
- You can change the default Panasonic start up logo to any logo you want. A new logo can be easily uploaded by connecting a computer to theprojector through the LAN or serial connection by using the Logo Transfer Software. Other security measures include, a security bar, key lock, andsecurity password. This is very effective for preventing theft
- 49' (15 m) Range Remote Control
- A unique ID number can be assigned to each projector using the supplied wireless remote control unit. This allows operation of a desired projectorwhen multiple units are set up at the same location. Three frequently used functions can be assigned to the function buttons for instant recall
- Eco Management Functions
- A number of functions are provided to reduce power consumption. You can easily set the eco management functions according to operating conditionsby using the eco button on the remote control
- Ecology-Conscious Design
- Lamp-free (no mercury)
Low heat dissipation
RoHS directive compliant
No halogenated flame retardants are used in the cabinet
Non-coated cabinet for easy recycling
Lead-free glass is used for the lens
Light source mode is selectable to reduce power consumption
Eco button on the remote control is used for setting up the eco management functions
Standby power consumption of only 0.5W has been achieved
An auto off timer switches the projector to standby mode when no input signal is received for a preset time
