Skip to content
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products
Barco MatrixPRO-II 32x32 Switcher with 3G SDI

Barco MatrixPRO-II 32x32 Switcher with 3G SDI

SKU R9004662

Condition:

Save 13% Save 13%
$14,478.75
$14,478.75 - $14,478.75
$14,478.75
$12,571.99
$12,571.99 - $12,571.99
$12,571.99
  • 32x32 Wideband Switcher with 3G SDI
  • Transmits 1080p @ 60Hz
  • 600MHz at -3dB Bandwidth
  • +/-1.0dB to 300MHz Flatness
  • Switches / Distributes without Artifacts
  • Genlock Input
  • Selectable RGB Delay Mode
  • I/O Grouping and Split Mode Switching
  • Panel / RS232 / LAN Controls
  • Fully Integrates with Encore / ScreenPRO

STEP 1

Product Selection

STEP 2

Contact Information

STEP 3

Review Information

Barco MatrixPRO-II 32x32 Switcher with 3G SDI

Enter the details below to request your custom quote in just a few minutes

Our Customers & Partners

Features

TheBarco MatrixPRO-II 32x32 Switcher with 3G SDIcombines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts.

A genlock input synchronizes all switching with the house sync. A user-selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub-switchers and let each color channel switch independently.

Control can be by front panel buttons, by RS232, or via Ethernet connections. The switcher also fully integrates with Barco's Encore and ScreenPRO-II presentation systems and can be controlled through them.

32x32 Wideband Matrix Switcher
  • Delivers switching and distribution without any artifacts
  • A genlock input synchronizes all switching with the house sync
  • Selectable RGB delay locks down-stream equipment to a new signal
  • Presets are available to be stored and facilitate easy system reconfiguration
  • I/O grouping and split-mode create sub-switchers and let each color channel switch independently

Item Includes

  • Barco MatrixPRO-II 3G/HD/SD High-Speed 3G Serial Digital Router
  • 32x32 SDI
  • Barco 3 Year Parts and Labor Warranty

Item Includes

Supported FormatsDVB-ASI, SMPTE 259M, SMPTE 292M, SMPTE 424M; 270M bps - 2.97Gbps; 2K, 2048x1556/23.98 and 24
""Inputs
StandardSMPTE 259M / SMPTE 292M / SMPTE 424M
Data Rate270Mbps - 1.485Gbps / 2.97Gbps
Connector75 ohm BNC female
Impedance75 ohm nominal
Return Loss> 15dB (5MHz - 1.485GHz); > 10dB (1.5 - 3GHz)
Cable EqualizationAutomatic up to 230' (70m) @ 2.97Gbps, typical Belden 1694A
Automatic up to 328' (100m) @ 1.485Gbps, typical Belden 1694A
Automatic up to 984' (300m) @ 270Mbps, typical Belden 8281
""Outputs
Connector75 ohm BNC female
Impedance75 ohm nominal
Return Loss> 15dB (5MHz - 1.485GHz); > 10dB (1.5 - 3GHz)
Signal Level800mVp-p 10%
Rise & Fall- 20 - 80%
- SD limit: 0.4 - 1.5ns, < 0.5ns rise/fall variation
- HD limit: < 270ps, < 100ps rise/fall variation
- 3G-HD limit: < 135ps, < 50ps rise/fall variation
Amplitude Overshoot< 10%
Signal PolarityNon-inverting electrical with respect to inputs
""""Power & Other Parameters
Power35W
Signal SpeedTiming jitter: SD: < 0.2 UI; 3G-HD/HD: < 1UI
Alignment jitter: SD: < 0.2UI; 3G-HD/HD: < 0.2UI
Safety RegulationsCompliant with CE EN55103-1 and 2
ControlSerial port: RS-232, DB9 connector female
Ethernet port: 10/100BaseT Ethernet bus, 1x RJ45 connector
Rack Mount2RU
Dimensions3.5 x 19 x 2" (8.8 x 48.3 x 5 cm)
Weight4.8 lbs (2.2 kg)


Make an offer
Make an offer
Make an offer