Features
Audio-Technicas AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technicas shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.
AT875R Features:
- Designed for video production and broadcast (ENG/EFP) audio acquisition
- Extremely short length (under 7") ideal for use with compact digital cameras
- Provides the narrow acceptance angle desirable for long-distance sound pickup
- Excellent sound rejection from the sides and rear of mic
- Tailored response minimizes camera and handling noise
- Operates on phantom power only
- RoHS compliantfree from all substances specified in the EU directive on hazardous substances
The AT875R requires 11V to 52V DC phantom power for operation. Output from the microphones XLRM-type connector is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is Pin 2 hot positive acoustic pressure produces positive voltage at Pin 2. To avoid phase cancellation and poor sound, all mic cables must be wired consistently: Pin 1-to-Pin 1, etc.
The high sensitivity of the AT875R assures useful output and an excellent match to most input sources. In some cases, however, an attenuator such as the Audio-Technica AT8202 may be required between the microphone and preamplifier to avoid overloading sensitive input stages.
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Line + gradient |
| FREQUENCY RESPONSE | 90-20,000 Hz |
| OPEN CIRCUIT SENSITIVITY | 30 dB (31.6 mV) re 1V at 1 Pa |
| IMPEDANCE | 100 ohms |
| MAXIMUM INPUT SOUND LEVEL | 127 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | 107 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 74 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 2 mA typical |
| WEIGHT | 80 g (2.8 oz) |
| DIMENSIONS | 175.0 mm (6.89") long,
21.0 mm (0.83") diameter |
| OUTPUT CONNECTOR | Integral 3-pin XLRM-type |
| ACCESSORIES FURNISHED | AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective pouch |
| AUDIO-TECHNICA CASE STYLE | SG4 |
Item Includes
ElementFixed-charge back plate, permanently polarized condenserPolar PatternLine + gradientFrequency Response90-20,000 HzOpen Circuit Sensitivity-30 dB (31.6 mV) re 1V at 1 PaImpedance100 ohmsMaximum Input Sound Level127 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical)107 dB, 1 kHz at Max SPLSignal-To-Noise Ratio74 dB, 1 kHz at 1 PaPhantom Power Requirements11-52V DC, 2 mA typicalDimensions (LxDia)175x21mm / 6.88x0.82"Weight80 g (2.8 oz)Mfr #AT875RSKUATAT875R
