Skip to content
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products
Barco ImagePRO-II All-in-One Video Scaler, Scan Converter & Switcher

Barco ImagePRO-II All-in-One Video Scaler, Scan Converter & Switcher

SKU R9004683
Save 25% Save 25%
$9,157.50
$9,157.50 - $9,157.50
$9,157.50
$6,892.59
$6,892.59 - $6,892.59
$6,892.59

All-in-one video scaler, scan converter and switcher

  • Converts any input signal format to any output format
  • HDCP and EDID management
  • USB back up and restore
  • Field replaceable DVI connectors

STEP 1

Product Selection

STEP 2

Contact Information

STEP 3

Review Information

Barco ImagePRO-II All-in-One Video Scaler, Scan Converter & Switcher

Enter the details below to request your custom quote in just a few minutes

Our Customers & Partners

Features

The dual outputImagePRO-II All-in-One Video Scaler, Scan Converter and SwitcherfromBarcocan convert any input signal format to any output format. The ImagePRO-II supports universal analog, DVI single and dual link, HDMI, DisplayPort, and SD/HD/3G SDI signal formats. Loop-through outputs are provided for the analog, DVI and SDI input and genlock signals. With features like HDCP and EDID management, USB backup and restore, multiple video effects and web page interface, the ImagePRO-II is an advanced and flexible signal processor in the industry. The Dual Output model can convert independently one input signal to two separate outputs at different resolutions and offers stereoscopic 3D conversion capability.

Next Generation Athena Scaler
Incorporating the 5th generation of the Athena scaler (Barco's custom-designed image processing technology), the ImagePRO-II supports high resolutions, high frame rates, high quality de-interlacing with advanced Motion Adaptive processing, fast source acquisition, color depth, and native support for all computer formats. As formats and interface requirements frequently change, the Athena scaler is built to be adaptable providing high signal clarity, while maintaining a low processing latency of only one frame.
Simple Setup and Advanced Control
Whether you are saving a setup for later or need to copy a setup to multiple units, the incorporated USB backup and restore functionality makes configuration simple and efficient. The ImagePRO-II is easily controlled via the front panel, browser, or a mobile device. Featuring the fast automatic source acquisition, the ImagePRO-II excels in automatically acquiring and locking to any input signal. On the output side, the ImagePRO-II can also automatically determine the format of the attached display, thereby optimizing its output resolution to match the display's resolution.
Shock-Tested, Roadie Approved
As the ImagePRO-II is built for the live event industry it has been designed with the road in mind. With features like field-replaceable DVI connectors, 1 RU form factor, and professional EtherCON connector, the ImagePRO-II supports the demanding environment of any live event.
Inputs/Outputs
Dual-link DVI/HDCP I/O
3Gb HDSDI I/O
HDMI/HDCP I/O
DisplayPort/HDCP I/O
Universal analog I/O
Loop-through on DVI, SDI, & analog inputs
User Interface
ImagePRO-3G front panel control
Web browser & tablet remote control
Encore suite of controllers
LED setup and configuration
Processing
12-bit processing
Resolution up to WQXGA (2560 x 1600)
Frame rate up to 120 Hz for 1080p
System configuration and restore via USB

Item Includes

Barco ImagePRO-II All-in-One Video Scaler, Scan Converter and Switcher (Dual Output)
  • Limited 3-Year Warranty on Parts & Labor

Item Includes

Video inputsInput 1: DVI-I

  • Digital formats; all single-link DVI digital formats up to 165 Mhz, per DVI 1.0 Specification and all dual-link DVI formats up to 300 Mhz; Max H Active: 4096 Max V Active: 3072
  • Analog formats: NTSC/PAL composite and Y/C video, SD YPbPR with bi-level sync, HD YPbPr with tri-level sync, RGBHV/RGBS/RGsB computer video with bi-level sync
  • Analog sampling: sources with pixel rates up to 170 Mhz are sampled 1:1; sources with pixel rates above 170 Mhz are filtered and sampled at 170 Mhz, including but not limited to 1920x1200p, 2048x1080p
  • Active loop-through output of all input signals, including HDCP and EDID
  • EDID version 1.3 compatible HDCP version 1.4 compatible


Note: Dual Link resolutions not available on ImagePRO-II JrInput 2: HD-15 VGA

  • Format: NTSC/PAL composite and Y/C video SD YPbPr with bi-level sync HD YPbPr with tri-level sync per SMPTE 274, RGBHV/RGBS/RGsB computer video with bi-level sync
  • Sampling: sources with pixel rates up to 170 Mhz are sampled 1:1; sources with pixel rates above 170 Mhz are filtered and sampled at 170 Mhz, including but not limited to: 1920x1200p, 2048x1080p
  • Active loop-through output of all input signals
  • EDID version 1.3 compatible

Input 3: HDMI (type A) (not available on ImagePRO-II Jr)

  • Formats: RGB and YCbCr; Resolutions up to 2048x1080p @ 60 Hz per HDMI 1.4 specification and 1,920 x 1,200p @ 60 Hz
  • EDID version 1.3 compatible
  • HDCP version 1.4 compatible
  • Deep color (30/36 bits)

Input 4: DisplayPort (not available on ImagePRO-II Jr)

  • Formats: resolutions up to 2560x1600 @ 60Hz (30 bits) per DisplayPort 1.1a specification
  • HDCP version 1.4 compatible

Input 5 & 6 (dual output option): SD/HD/3G SDI on BNC

  • Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424
  • Re-clocked loop-through output
  • Dual link HDSDI per SMPTE 372 (dual output option)

Video outputsSD/HD/3G and BarcoLink SDI

  • Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424
  • Dual link HDSDI per SMPTE 372 (dual output option)

NTSC/PAL composite videoCVBS on BNC connector
Note: dedicated composite output not available on ImagePRO-II JrDVI-D

  • Formats all single-link DVI digital formats up to 165 Mhz, per DVI 1.0 specification
  • All dual-link DVI formats up to 330 Mhz
  • EDID version 1.3 compatible
  • HDCP version 1.4 compatible

HD-15 VGA

  • Formats: NTSC/PAL composite on green, NTSC/PAL Y/C video with bi-level sync on Y only, (Y: Green, C: Red); SD YPbPr with bi-level sync; HD YPbPR with tri-level sync per SMPTE 274; RGBHV/RGBS/RGsB computer video with bi-level sync
  • EDID version 1.3 compatible

HDMI (type A) (not available on ImagePRO-II Jr)

  • Formats: RGB and YCbCr at 4:4:4, YCbCr at 4:2:2, per HDMI 1.4 specification; Resolutions up to 2,048 x 1,080p @ 60Hz and 1,920 x 1,200 @ 60Hz
  • EDID version 1.3 compatible
  • HDCP version 1.4 compatible

Output 3: DisplayPort (not available on ImagePRO-II Jr)

  • Formats: resolutions up to 2560x1600 @ 60Hz (30 bits) per DisplayPort 1.1a
  • HDCP version 1.4 compatible

OtherGenlockAnalog Ref Input/Loop/Output on BNC connectors; Bi-level and Blackburst at SD and Tri-level at HD or locked to any inputRemote control

  • USB 1.1
  • Ethernet RJ-45, 10/100 Mbps Autosense
  • Computer, tablet, smartphone, or external Encore or ScreenPRO-II Controller via Ethernet link.
  • Control functions include: source input configuration, output format selection, test pattern selection, transition effect selection and control

Dimensions

  • Height: 1.75 in (4.4 cm) - 1 RU Rackmount
  • Width: 17 in (43.2 cm)- without chassis handles, 19.06 in (48.4cm) with chassis handles attached
  • Depth: 17.09 in (43.4 cm) from front panel to rear panel, 18.51 in (47 cm) overall

Weight15.75 lbs (7.144 kg)Input powerPower 100-240 VAC, 47-63 Hz, auto-selecting 2.0A maximumEnvironmental temperature0-40 CelsiusEnvironmental humidity0-95% noncondensingWarrantyFull three-year parts and labor warranty.


Make an offer
Make an offer
Make an offer