| Projector type |
1-Chip DLP™ projector |
| DLP™ CHIP |
|
| Panel size |
17.0 mm (0.67 in) diagonal, 16:10 aspect ratio |
| Display method |
DLP™ chip x 1, DLP™ projection system |
| Number of pixels |
2,304,000 (1920 x 1200) pixels |
| Light source |
Laser diodes |
| Light output |
8,000 lm*1 / 8,400 lm (Center)*2 |
| Time until light output declines to 50 %*2 |
20,000 hours (NORMAL) / 24,000 hours (ECO) |
| Native Resolution |
1920 x 1200 pixels |
| Maximum resolution |
4,608,000 pixels / 2715 x 1697 dots (with Smooth Pixel Drive: ON) |
| Contrast ratio*1 |
10,000:1 (Full On/Full Off) with [Dynamic Contrast] set to [3] |
| Screen size (diagonal) |
1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio |
| Center-to-corner zone ratio*1 |
90 % |
| Lens |
No lens included. Optional powered zoom/focus lenses available. (See Accessories tab.) |
| LENS SHIFT*4 |
|
Vertical (from center
of screen) |
+50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered) |
Horizontal (from center
of screen) |
+30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered) |
| Keystone correction range |
Vertical: ±40° (±5° with ET-DLE020, ±16° with ET-DLE060, ±22° with ET-DLE105/ET-DLE085/ET-DLE055, +5° with ET-DLE035),
Horizontal: ±15° (±10° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020) |
| Keystone correction range with optional ET-UK20 Upgrade Kit |
Vertical: ±45° (±16° with ET-DLE060, ±40° with ET-DLE150/ET-DLE250/ET-DLE170, ±22° with ET-DLE105/ET-DLE085/ET-DLE055),
Horizontal: ±40° (±10° with ET-DLE060, ±15° with ET-DLE105/ET-DLE085/ET-DLE055),
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55°. |
| Installation |
Ceiling/floor, front/rear, free 360-degree installation |
| TERMINALS |
|
| SDI IN |
BNC x 1: 3G/HD-SDI input |
| HDMI IN |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5) |
| DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| MULTI PROJECTOR SYNC IN |
BNC x 1 |
| MULTI PROJECTOR SYNC OUT |
BNC x 1 |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| SERIAL OUT |
D-sub 9-pin (male) x 1 for link control |
| REMOTE 1 IN |
M3 x 1 for wired remote control |
| REMOTE 1 OUT |
M3 x 1 for link control (for wired remote control) |
| REMOTE 2 IN |
D-sub 9-pin (female) x 1 for external control (parallel) |
| LAN |
RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (Class 2), Art-Net |
| DIGITAL LINK |
RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5 |
| USB |
USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA) |
| Expansion slot |
Open slot for SLOT NX compatible interface board |
| Power supply |
AC 100–240 V, 50/60 Hz |
| Power consumption |
880 W |
| Cabinet materials |
Molded plastic |
| Operation noise*1 |
40 dB (Normal) / 38 dB (Quiet) |
| Dimensions (W×H×D) |
498 x 200*6 x 581 mm (19 19/32" x 7 7/8" *6 x 22 7/8") (with standard lens)
498 x 200*6 x 538 mm (19 19/32" x 7 7/8" *6 x 21 3/16") (without lens) |
| Weight*7 |
Approx. 24.2 kg (53.4 lbs) (with standard lens)
Approx. 23.4 kg (51.6 lbs) (without lens) |
| Operating environment |
Operating temperature: 0–45 °C (32–113 °F)*8 *9, operating humidity: 10–80 % (no condensation) |
| Applicable software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ |
